Lead Pipe Map

Maine · 12 community water systems

Lead pipes in Penobscot County, ME

12 community water systems serving Penobscot County reported 4 lead and 443 galvanized-requiring-replacement service lines, plus 3,951 of unknown material. The most are in Bangor Water District.

1.6% of these systems' lines are lead or galvanized requiring replacement, higher than the Maine average (0.6%) and lower than the national average (3.1%).

4Lead
443Galvanized, replace
3,951Unknown
23,420Non-lead

Water systems serving Penobscot County

Water systemLeadGalv.Unknown% leadPeople
Bangor Water DistrictBangor44062754.0%27,298
East Millinocket Water WorksEast Millinocket01902.2%2,133
Lincoln Water DistrictLincoln0900.7%3,020
Old Town Water DistrictOld Town082,6950.2%7,648
Brewer Water DepartmentBrewer01397<0.1%8,860
Howland Water DepartmentHowland003130%1,025
Newport Water DistrictNewport001490%1,900
Orono-Veazie Water DistrictOrono001050%5,793
Dexter Utility DistrictDexter0080%2,338
Hampden Water DistrictHampden0060%4,800
Towne Center-Ridgewood ApartmentsHermon0030%60
Maine Water Company Millinocket DivisionMillinocket0000%5,400

Systems that also serve other counties are counted in full. Your water bill names your utility.

What to do if your line is lead or unknown

  1. Check the pipe where water enters your home.
  2. Use a filter certified to NSF/ANSI 53 for lead for drinking and cooking.
  3. Test your water, often free through the utility.
  4. Ask your utility about free or discounted replacement; most lines must be replaced by December 31, 2037.

Check another water system

Questions

Does Penobscot County have lead pipes?

Yes. Water systems serving Penobscot County reported 4 lead and 443 galvanized-requiring-replacement service lines, plus 3,951 of unknown material.

Which Penobscot County water systems have the most lead lines?

Bangor Water District (410), East Millinocket Water Works (19), Lincoln Water District (9).

How do I check my home in Penobscot County?

Find the water system named on your water bill in the table above, open its page and use its address-level inventory. You can also scratch-test the pipe where it enters your home.