Mount Pleasant, TN · PWSID TN0000488
Mount Pleasant Water Sys #1 lead service lines
49 lead or galvanized lines to replace
Mount Pleasant Water Sys #1 reported 0 lead and 49 galvanized-requiring-replacement service lines out of 2,948 in its inventory. That's about 1 in 60 lines. Another 2,145 (73%) are still listed as unknown material.
Ranks #33 of 70 Tennessee systems with confirmed lead lines, and #2,644 nationally.
1.7% of Mount Pleasant Water Sys #1's service lines are lead or galvanized requiring replacement. That's lower than the Tennessee average (2.2%) and lower than the national average (3.1%).
- Lead 0%
- Galvanized (replace) 1.7%
- Unknown 73%
- Non-lead 26%
Total service lines reported: 2,948. Reported all required service line types. Population served: 8,914; 3,351 connections.
Lead test results
Mount Pleasant Water Sys #1's most recent 90th-percentile lead result (2024) was 1 ppb, below both the 15 ppb action level and the 10 ppb level that takes effect in 2027. This means 90% of homes sampled were at or below that level; individual homes, especially those with lead lines, can be higher.
Lead and Copper Rule 90th-percentile results reported to EPA, in parts per billion. Dashed lines: 15 ppb action level and the 10 ppb level from November 1, 2027.
Progress since 2025 Q1
Reported lead and galvanized-requiring-replacement lines went from 49 in 2025 Q1 to 49 in 2026 Q3: no change. Lines of unknown material went from 2,145 to 2,145, no change.
Quarterly counts reported to EPA. A drop usually means lines were replaced or confirmed non-lead; a rise usually means more lines were identified. Replacement progress rankings.
Lead rule violations
EPA's data lists no Lead and Copper Rule violations for Mount Pleasant Water Sys #1 since 2015. That covers testing, reporting, corrosion control and public notice requirements; it isn't a guarantee about any individual home.
Source: EPA SDWIS violation records for the Lead and Copper Rule.
Where the water comes from
Mount Pleasant Water Sys #1's main water source is groundwater under the direct influence of surface water.
Source: EPA SDWIS water system and facility records.
Check your own address
These counts cover the whole system. To see whether your line is lead, use the utility's address-level inventory. Utilities had to prepare one by October 16, 2024 and make it publicly accessible; systems serving more than 50,000 people must post it online.
No map yet? Do the 2-minute scratch and magnet test on the pipe where water enters your home.
Protect your drinking water now
If your line is lead, galvanized or unknown, filter water for drinking, cooking and baby formula. Use a filter certified to NSF/ANSI 53 for lead. Run cold water for a few minutes after it sits for hours, and never use hot tap water for cooking.
How to pick a lead-certified filter · How to test your water for lead
Getting the line replaced
EPA's Lead and Copper Rule Improvements require most systems to replace lead and galvanized-requiring-replacement lines by December 31, 2037. Ask Mount Pleasant Water Sys #1 whether it replaces the private side for free or with a cost share before you hire anyone. If you want it done sooner, or your utility doesn't cover your side, a licensed plumber can quote it. What replacement costs.
County pages: Lead pipes in Maury County
Cities served
ZIP codes served
ZIP codes whose center falls inside Mount Pleasant Water Sys #1's mapped service area (EPA service area boundaries). Neighboring utilities may serve parts of the same ZIP.
38474
Other water systems nearby
| System | Lead + galv. | Unknown |
|---|---|---|
| Columbia Power and Water Systems | 0 | 0 |
| Spring Hill Water Dept | 0 | 0 |
| Maury County Water System | 0 | 0 |
Check another water system
Questions
Does Mount Pleasant Water Sys #1 have lead pipes?
Yes. Mount Pleasant Water Sys #1 reported 0 lead service lines and 49 galvanized lines that must be replaced, out of 2,948 total. 2,145 more are of unknown material.
How do I check if my home's service line is lead?
Look up your address on Mount Pleasant Water Sys #1's official service line inventory, which utilities must make publicly available. You can also scratch the pipe where it enters your home: lead is soft, dull gray, scratches to shiny silver and does not attract a magnet.
When will Mount Pleasant Water Sys #1 replace lead service lines?
Under EPA's Lead and Copper Rule Improvements, most systems must replace lead and galvanized-requiring-replacement lines by December 31, 2037, starting from November 1, 2027. The rule is being challenged in court, so dates could change. Many utilities run free or cost-share programs now.
Has Mount Pleasant Water Sys #1 had lead violations?
EPA's data shows no Lead and Copper Rule violations since 2015 for Mount Pleasant Water Sys #1.
Which water filters remove lead?
Use a filter certified to NSF/ANSI Standard 53 for lead reduction, or NSF/ANSI 58 for reverse osmosis. Check the certification on NSF's listings, not just the box.
Embed or cite this data
Local news sites, blogs and community groups can embed this card. It updates when EPA releases new data.
Citation: Lead Pipe Map, "Mount Pleasant Water Sys #1 lead service lines," https://leadpipemap.com/tn/mount-pleasant-water-sys-1/. Source: EPA SDWIS service line inventory, 2026 Q3. Download the full dataset on the data page.