Lead Pipe Map

Spokane County, WA · PWSID WA5396601

Whitworth Water District 2 lead service lines

19 lead or galvanized lines to replace

Whitworth Water District 2 reported 0 lead and 19 galvanized-requiring-replacement service lines out of 198 in its inventory. That's about 1 in 10 lines. Another 0 (0%) are still listed as unknown material.

Ranks #46 of 112 Washington systems with confirmed lead lines, and #3,750 nationally.

9.6% of Whitworth Water District 2's service lines are lead or galvanized requiring replacement. That's higher than the Washington average (0.3%) and higher than the national average (3.1%).

0Lead
19Galvanized, replace
0Unknown material
179Non-lead

Total service lines reported: 198. Reported all required service line types. Population served: 26,883; 12,270 connections.

Lead test results

Whitworth Water District 2's most recent 90th-percentile lead result (Jan 2022–Dec 2024) was 1.3 ppb, below both the 15 ppb action level and the 10 ppb level that takes effect in 2027. This means 90% of homes sampled were at or below that level; individual homes, especially those with lead lines, can be higher.

1510Jan 2016–Dec 2018: 1.3 ppb2016Jan 2019–Dec 2021: 1 ppb2019Jan 2022–Dec 2024: 1.3 ppb2022

Lead and Copper Rule 90th-percentile results reported to EPA, in parts per billion. Dashed lines: 15 ppb action level and the 10 ppb level from November 1, 2027.

Progress since 2025 Q1

Reported lead and galvanized-requiring-replacement lines went from 19 in 2025 Q1 to 19 in 2026 Q3: no change. Lines of unknown material went from 0 to 0, no change.

2025 Q1: 19 lead + galvanized192025 Q12025 Q2: 19 lead + galvanized192025 Q22025 Q3: 19 lead + galvanized192025 Q32025 Q4: 19 lead + galvanized192025 Q42026 Q1: 19 lead + galvanized192026 Q12026 Q2: 19 lead + galvanized192026 Q22026 Q3: 19 lead + galvanized192026 Q3

Quarterly counts reported to EPA. A drop usually means lines were replaced or confirmed non-lead; a rise usually means more lines were identified. Replacement progress rankings.

Lead rule violations

EPA's data lists no Lead and Copper Rule violations for Whitworth Water District 2 since 2015. That covers testing, reporting, corrosion control and public notice requirements; it isn't a guarantee about any individual home.

Source: EPA SDWIS violation records for the Lead and Copper Rule.

Where the water comes from

Whitworth Water District 2's main water source is groundwater (wells). It buys treated water from City of Spokane. The seller treats the water, including corrosion control that keeps lead from dissolving out of pipes, while Whitworth Water District 2 is responsible for its own service line inventory and replacement program. It sells water to 4 other water systems: Spo Co Water Dist 3 Sys 3, Spo Co Water Dist 3 Sys 4, Whitworth University, Green Bluff Water Assn.

Source: EPA SDWIS water system and facility records.

Check your own address

These counts cover the whole system. To see whether your line is lead, use the utility's address-level inventory. Utilities had to prepare one by October 16, 2024 and make it publicly accessible; systems serving more than 50,000 people must post it online.

No map yet? Do the 2-minute scratch and magnet test on the pipe where water enters your home.

Protect your drinking water now

If your line is lead, galvanized or unknown, filter water for drinking, cooking and baby formula. Use a filter certified to NSF/ANSI 53 for lead. Run cold water for a few minutes after it sits for hours, and never use hot tap water for cooking.

How to pick a lead-certified filter · How to test your water for lead

Getting the line replaced

EPA's Lead and Copper Rule Improvements require most systems to replace lead and galvanized-requiring-replacement lines by December 31, 2037. Ask Whitworth Water District 2 whether it replaces the private side for free or with a cost share before you hire anyone. If you want it done sooner, or your utility doesn't cover your side, a licensed plumber can quote it. What replacement costs.

County pages: Lead pipes in Spokane County

ZIP codes served

ZIP codes whose center falls inside Whitworth Water District 2's mapped service area (EPA service area boundaries). Neighboring utilities may serve parts of the same ZIP.

990059920899218

Other water systems nearby

SystemLead + galv.Unknown
City of Spokane1,0010
Vera Water & Power3113
Modern Electric Water Co05,162
City of Airway Heights0374
Town of Fairfield0130
Stevens Co PUD - West Shore0164
Town of Latah582
Vel View Water Dist 1340

Check another water system

Questions

Does Whitworth Water District 2 have lead pipes?

Yes. Whitworth Water District 2 reported 0 lead service lines and 19 galvanized lines that must be replaced, out of 198 total. 0 more are of unknown material.

How do I check if my home's service line is lead?

Look up your address on Whitworth Water District 2's official service line inventory, which utilities must make publicly available. You can also scratch the pipe where it enters your home: lead is soft, dull gray, scratches to shiny silver and does not attract a magnet.

When will Whitworth Water District 2 replace lead service lines?

Under EPA's Lead and Copper Rule Improvements, most systems must replace lead and galvanized-requiring-replacement lines by December 31, 2037, starting from November 1, 2027. The rule is being challenged in court, so dates could change. Many utilities run free or cost-share programs now.

Has Whitworth Water District 2 had lead violations?

EPA's data shows no Lead and Copper Rule violations since 2015 for Whitworth Water District 2.

Which water filters remove lead?

Use a filter certified to NSF/ANSI Standard 53 for lead reduction, or NSF/ANSI 58 for reverse osmosis. Check the certification on NSF's listings, not just the box.

Embed or cite this data

Local news sites, blogs and community groups can embed this card. It updates when EPA releases new data.

Citation: Lead Pipe Map, "Whitworth Water District 2 lead service lines," https://leadpipemap.com/wa/whitworth-water-district-2/. Source: EPA SDWIS service line inventory, 2026 Q3. Download the full dataset on the data page.