Bellwood, IL · PWSID IL0310150
Bellwood lead service lines
1,257 lead or galvanized lines to replace
Bellwood reported 1,257 lead and 0 galvanized-requiring-replacement service lines out of 2,892 in its inventory. That's 43% of all its lines. Another 930 (32%) are still listed as unknown material.
Ranks #57 of 397 Illinois systems with confirmed lead lines, and #331 nationally.
43% of Bellwood's service lines are lead or galvanized requiring replacement. That's higher than the Illinois average (17%) and higher than the national average (3.1%).
- Lead 43%
- Galvanized (replace) 0%
- Unknown 32%
- Non-lead 24%
Total service lines reported: 2,892. Reported all required service line types. Population served: 19,156; 5,912 connections.
Lead test results
Bellwood's most recent 90th-percentile lead result (2026) was 4.5 ppb, below both the 15 ppb action level and the 10 ppb level that takes effect in 2027. This means 90% of homes sampled were at or below that level; individual homes, especially those with lead lines, can be higher.
Lead and Copper Rule 90th-percentile results reported to EPA, in parts per billion. Dashed lines: 15 ppb action level and the 10 ppb level from November 1, 2027.
Progress since 2025 Q1
Reported lead and galvanized-requiring-replacement lines went from 1,144 in 2025 Q1 to 1,257 in 2026 Q3: up 113 (9.9%). Lines of unknown material went from 397 to 930, up 533 (134%).
Quarterly counts reported to EPA. A drop usually means lines were replaced or confirmed non-lead; a rise usually means more lines were identified. Replacement progress rankings.
Lead rule violations
EPA's data lists no Lead and Copper Rule violations for Bellwood since 2015. That covers testing, reporting, corrosion control and public notice requirements; it isn't a guarantee about any individual home.
Source: EPA SDWIS violation records for the Lead and Copper Rule.
Where the water comes from
Bellwood's main water source is purchased surface water. It buys treated water from Melrose Park. The seller treats the water, including corrosion control that keeps lead from dissolving out of pipes, while Bellwood is responsible for its own service line inventory and replacement program.
Source: EPA SDWIS water system and facility records.
Check your own address
These counts cover the whole system. To see whether your line is lead, use the utility's address-level inventory. Utilities had to prepare one by October 16, 2024 and make it publicly accessible; systems serving more than 50,000 people must post it online.
No map yet? Do the 2-minute scratch and magnet test on the pipe where water enters your home.
Protect your drinking water now
If your line is lead, galvanized or unknown, filter water for drinking, cooking and baby formula. Use a filter certified to NSF/ANSI 53 for lead. Run cold water for a few minutes after it sits for hours, and never use hot tap water for cooking.
How to pick a lead-certified filter · How to test your water for lead
Getting the line replaced
EPA's Lead and Copper Rule Improvements require most systems to replace lead and galvanized-requiring-replacement lines by December 31, 2037. Ask Bellwood whether it replaces the private side for free or with a cost share before you hire anyone. If you want it done sooner, or your utility doesn't cover your side, a licensed plumber can quote it. What replacement costs.
County pages: Lead pipes in Cook County
Cities served
ZIP codes served
ZIP codes whose center falls inside Bellwood's mapped service area (EPA service area boundaries). Neighboring utilities may serve parts of the same ZIP.
60104
Other water systems nearby
| System | Lead + galv. | Unknown |
|---|---|---|
| Chicago | 360,857 | 39,427 |
| Cicero | 13,039 | 1,148 |
| Evanston | 9,468 | 0 |
| Skokie | 6,349 | 8,910 |
| Berwyn | 10,828 | 174 |
| Oak Park | 7,649 | 1,222 |
| Elmwood Park | 5,825 | 0 |
| Evergreen Park | 5,981 | 0 |
Check another water system
Questions
Does Bellwood have lead pipes?
Yes. Bellwood reported 1,257 lead service lines and 0 galvanized lines that must be replaced, out of 2,892 total. 930 more are of unknown material.
How do I check if my home's service line is lead?
Look up your address on Bellwood's official service line inventory, which utilities must make publicly available. You can also scratch the pipe where it enters your home: lead is soft, dull gray, scratches to shiny silver and does not attract a magnet.
When will Bellwood replace lead service lines?
Under EPA's Lead and Copper Rule Improvements, most systems must replace lead and galvanized-requiring-replacement lines by December 31, 2037, starting from November 1, 2027. The rule is being challenged in court, so dates could change. Many utilities run free or cost-share programs now.
Has Bellwood had lead violations?
EPA's data shows no Lead and Copper Rule violations since 2015 for Bellwood.
Which water filters remove lead?
Use a filter certified to NSF/ANSI Standard 53 for lead reduction, or NSF/ANSI 58 for reverse osmosis. Check the certification on NSF's listings, not just the box.
Embed or cite this data
Local news sites, blogs and community groups can embed this card. It updates when EPA releases new data.
Citation: Lead Pipe Map, "Bellwood lead service lines," https://leadpipemap.com/il/bellwood/. Source: EPA SDWIS service line inventory, 2026 Q3. Download the full dataset on the data page.