Lead Pipe Map

Pennsylvania · 10 community water systems

Lead pipes in Westmoreland County, PA

10 community water systems serving Westmoreland County reported 2,496 lead and 572 galvanized-requiring-replacement service lines, plus 22,897 of unknown material. The most are in Mawc Sweeney Plant.

3.0% of these systems' lines are lead or galvanized requiring replacement, about the same as the Pennsylvania average (2.9%) and about the same as the national average (3.1%).

2,496Lead
572Galvanized, replace
22,897Unknown
75,274Non-lead

Water systems serving Westmoreland County

Water systemLeadGalv.Unknown% leadPeople
Mawc Sweeney PlantWestmoreland County2,4082721,9114.1%143,000
Latrobe Muni AuthWestmoreland County452731,3583.6%30,000
Derry Boro Muni AuthWestmoreland County34181,9882.1%6,500
Mawc Furnace RunWestmoreland County991,3621.1%3,100
New Kensington Muni AuthWestmoreland County0014,0780%47,800
Ligonier TWP Muni AuthWestmoreland County001,6970%3,293
Highridge Water AuthWestmoreland County002810%16,000
Youngstown Boro Muni AuthWestmoreland County001930%2,730
Stanton Hills CommunityWestmoreland County00260%100
Pine Garden ApartmentsWestmoreland County0030%40

Systems that also serve other counties are counted in full. Your water bill names your utility.

What to do if your line is lead or unknown

  1. Check the pipe where water enters your home.
  2. Use a filter certified to NSF/ANSI 53 for lead for drinking and cooking.
  3. Test your water, often free through the utility.
  4. Ask your utility about free or discounted replacement; most lines must be replaced by December 31, 2037.

Check another water system

Questions

Does Westmoreland County have lead pipes?

Yes. Water systems serving Westmoreland County reported 2,496 lead and 572 galvanized-requiring-replacement service lines, plus 22,897 of unknown material.

Which Westmoreland County water systems have the most lead lines?

Mawc Sweeney Plant (2,680), Latrobe Muni Auth (318), Derry Boro Muni Auth (52).

How do I check my home in Westmoreland County?

Find the water system named on your water bill in the table above, open its page and use its address-level inventory. You can also scratch-test the pipe where it enters your home.